Home

Alpine Amps

MRP-F250 - 4/3/2 Channel Power Amplifier

Power up your system with Alpine’s all new V-Power amplifiers. These amps have a new aggressive design, but they not only look good they provide outstanding power, flexibility and value.

The 360-watt MRP-F250 amplifier is part of a line-up of V-Power amplifiers that are the best selling amplifiers in their class! Ready to deliver high dollar per watt performance, clean and reliable power output and an aggressive new cosmetic look, the MRP-F250 meets more than just your power needs. Rugged new heat sinks ensure lower temperature and optimum performance for non-stop output. Even during extreme power demands , the music will keep coming. With massive amounts of power at low distortion, you’ll enjoy cleaner bass, the way it’s meant to be heard.

Speaker Level Input

V-power amplifiers connect to any head unit. This is a great way to upgrade your original factory system.

Built-in Crossover

Want speakers that play louder with less distortion? For the ultimate control, built- in crossover helps ensure the best performance from the speakers. No need for an expensive, inconvenient external crossover, when it’s already built in.

Subsonic Filter

The MRP-F250 is equipped with subsonic filter, to improve subwoofer performance. Cut off Inaudible bass signals that cause the amp to work harder than it should. Say hello to stronger, focused bass with cleaner output!

FEATURES

General

  • Gain Control: Continuously Adjustable Gain Control
  • Board Design: Dual Sided Glass Epoxy PC Board
  • Final Outputs: Non-Fading Pre-Amp Output
  • Pre-Amp Stage: Discrete
  • Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals
  • Crossover: Adjustable Low-Pass / High-Pass
  • Speaker-Level Inputs: Speaker Level Inputs
  • RCA Output: Gold Plated RCA Input Connectors
  • Power Indicator: Top Mounted Blue LED Power/Status Indicator
  • Current Protection: Auto Over-Current Protection
  • Board Circuitry: STAR Circuitry
  • Power Supply Design: MOSFET Power Supply
  • Power Supply: DC-DC PWM Power Supply
  • Thermal Control: High Temperature Protection
  • MultiMode™: MultiMode™ Capability
  • Channel Design: 4/3/2 Channel
  • Amplifier Type: Class-A/B

Install

  • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
  • Terminal Layout: Two-Sided

SPECIFICATIONS

General

  • Signal to Noise: 100dBA
  • Speaker Impedance: 4 or 2 ?
  • Frequency Response: 10Hz - 50kHz (+0,-1dB)
  • Input Sensitivity: 0.2 - 4.0V
  • Power Requirements: 14.4V DC (11V to 16V)

Dimensions

  • Heat Sink (WxHxD) in: 9-9/64'' x 2-23/64'' x 9-27/32''
  • Heat Sink (WxHxD) mm: 232mm x 60mm x 241mm
  • Foot Print (WxHxD) in: 10-15/16'' x 2-23/64'' x 9-27/32''
  • Foot Print (WxHxD) mm: 279mm x 60mm x 241mm

Sound Tuning

  • Subsonic Filter: 15Hz (Fixed)
  • EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz 0 to +12dB(3/4ch.), On/Off
  • Crossover: 50-400Hz, HP/LP/Off (12dB/oct.)

RMS Power Ratings

  • Bridged 4 Ohms: (@ 14.4V ?1%THD+N, 20Hz-20kHz), (0.08% THD) 100W x 2
  • Per channel into 2 Ohms: (@ 14.4V ?1%THD+N, 20Hz-20kHz), (0.03% THD) 50W x 4
  • Per channel into 4 Ohms: (@ 14.4V ?1%THD+N, 20Hz-20kHz), (0.08% THD) 40W x 4

CEA-2006 Power Ratings

  • CEA-2006 Power Rating: (4 ?@14.4V ?1%THD+N), S/N 80dBA (ref: 1W into 4?): 40W x 4

MRP-F450 - 4/3/2 Channel Power Amplifier

The 700-watt MRP-F450 amplifier is part of a line-up of V-Power amplifiers that are the best selling amplifiers in their class! Ready to deliver high dollar per watt performance, clean and reliable power output and an aggressive new cosmetic look, the MRP-F450 meets more than just your power needs. Rugged new heat sinks ensure lower temperature and optimum performance for non-stop output. Even during extreme power demands , the music will keep coming. With massive amounts of power at low distortion, you’ll enjoy cleaner bass, the way it’s meant to be heard.

Speaker Level Input

V-power amplifiers connect to any head unit. This is a great way to upgrade your original factory system.

Built-in Crossover

Want speakers that play louder with less distortion? For the ultimate control, built- in crossover helps ensure the best performance from the speakers. No need for an expensive, inconvenient external crossover, when it’s already built in.

Subsonic Filter

The MRP-F450 is equipped with subsonic filter, to improve subwoofer performance. Cut off Inaudible bass signals that cause the amp to work harder than it should. Say hello to stronger, focused bass with cleaner output!

FEATURES

General

  • Gain Control: Continuously Adjustable Gain Control
  • Board Design: Dual Sided Glass Epoxy PC Board
  • Final Outputs: Non-Fading Pre-Amp Output
  • Pre-Amp Stage: Discrete
  • Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals
  • Crossover: Adjustable Low-Pass / High-Pass
  • Speaker-Level Inputs: Speaker Level Inputs
  • RCA Output: Gold Plated RCA Input Connectors
  • Power Indicator: Top Mounted Blue LED Power/Status Indicator
  • Current Protection: Automatic Over-Current Power/Status Indicator
  • Board Circuitry: STAR Circuitry
  • Power Supply Design: MOSFET Power Supply
  • Power Supply: DC-DC PWM Power Supply
  • Thermal Control: High Temperature Protection
  • MultiMode™: MultiMode™ Capability
  • Channel Design: 4/3/2 Channel
  • Amplifier Type: Class-A/B

Install

  • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
  • Terminal Layout: Two-Sided

SPECIFICATIONS

General

  • Signal to Noise: 100dBA
  • Speaker Impedance: 4 or 2 ?
  • Frequency Response: 10Hz - 50kHz (+0,-1dB)
  • Input Sensitivity: 0.2 - 4.0V
  • Power Requirements: 14.4V DC (11V to 16V)

Dimensions

  • Heat Sink (WxHxD) in: 11-15/64''x 2-23/64'' x 9-27/32''
  • Heat Sink (WxHxD) mm: 285mm x 60mm x 241mm
  • Foot Print (WxHxD) in: 13'' x 2-23/64'' x 9-27/32''
  • Foot Print (WxHxD) mm: 332mm x 60mm x 241mm

Sound Tuning

  • Subsonic Filter: 15Hz (Fixed)
  • EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz 0 to +12dB(3/4ch.), On/Off
  • Crossover: 50-400Hz, HP/LP/Off (12dB/oct.)

RMS Power Ratings

  • Bridged 4 Ohms: (@ 14.4V ?1%THD+N, 20Hz-20kHz), (0.08% THD) 200W x 2
  • Per channel into 2 Ohms: (@ 14.4V ?1%THD+N, 20Hz-20kHz), (0.03% THD) 100W x 4
  • Per channel into 4 Ohms: (@ 14.4V ?1%THD+N, 20Hz-20kHz), (0.08% THD) 70W x 4

CEA-2006 Power Ratings

  • CEA-2006 Power Rating: (4 ?@14.4V ?1%THD+N), S/N 80dBA (ref: 1W into 4?): 70W x 4

MRP-M500 - Mono Power Amplifier

Overview

Best Dollar-Per-Watt performance

The Perfect Upgrade Choice

Sleek Aggressive Design

Power up your system with Alpine’s V-Power amplifiers! This best selling family of amplifiers offers more choices for building the right system for you, and provides flexibility and value in an aggressive design. Alpine continues to bring you mind-blowing sound performance – only the best - so you get the sound you deserve.

High Performance, High Value

Want serious power for your system? While trying not to blow your budget? Go with one of the Alpine V-Power amps for unbeatable dollar-per-watt value and Alpine quality sound, along with Bass EQ for maximizing bass performance.

Clean, Efficient Power

Alpine’s high-power mono amp Class-D design gives you more power, cleaner signal and tighter, deeper bass without draining your battery. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class-A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.

Exceptionally Easy Upgrade

The V-Power’s speaker level inputs connect directly to any head unit, without the need for external converters. This makes the V-Power series ideal for upgrading factory audio equipment. High-level speaker inputs and flush mount controls make for easy installation. The units come with end caps that cover and protect your wiring connections while creating a clean, finished appearance. Step up your factory system to Alpine sound.

Cooler Amps = No Shut Down

Rugged heat sinks and an extremely sophisticated thermal managament processor that continuously monitors the amp’s temperature, ensure nonstop output and stable, reliable performance.

FEATURES

General

  • Gain Control: Continuously Adjustable Gain Control
  • Board Design: Dual Sided Glass Epoxy PC Board
  • Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals
  • Crossover: Adjustable Low-Pass
  • Speaker-Level Inputs: Speaker Level Inputs
  • RCA Output: Gold Plated RCA Input Connectors
  • Power Indicator: Top Mounted Blue LED Power Indicator
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Board Circuitry: STAR Circuitry
  • Power Supply Design: MOSFET Power
  • Power Supply: DC-DC PWM Power Supply
  • Thermal Control: Thermal Management Control
  • Channel Design: 1 Channel (Mono)
  • Amplifier Type: Class-D (Digital)

Install

  • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
  • Terminal Layout: Two-Sided

SPECIFICATIONS

General

  • Signal to Noise: 100dBA
  • Speaker Impedance: 4 or 2 ?
  • Frequency Response: 20 -200Hz (200Hz/-3dB)
  • Input Sensitivity: 0.2 - 4.0V
  • Power Requirements: 14.4V DC (11V to 16V)

Dimensions

  • Heat Sink (WxHxD) in: 8-17/64'' x 2-23/64'' x 9-33/64''
  • Heat Sink (WxHxD) mm: 210mm x 60mm x 242mm
  • Foot Print (WxHxD) in: 10-5/8'' x 2-23/64'' x 9-33/64''
  • Foot Print (WxHxD) mm: 270mm x 60mm x 242mm

Sound Tuning

  • Subsonic Filter: 15Hz (Fixed), -24dB/oct.
  • EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz 0 to +12dB
  • Crossover: 50Hz-200Hz, -24dB/oct. (Low-Pass)

RMS Power Ratings

  • Per channel into 2 Ohms: (@ 14.4V ?1%THD+N, 20Hz - 200Hz) 500W x 1
  • Per channel into 4 Ohms: (@ 14.4V ?1%THD+N, 20Hz - 200Hz) 300W x 1

CEA-2006 Power Ratings

CEA-2006 Power Rating: (4 ? @14.4V ?1% THD+N, S/N: 75dBA, ref:1W into 4 ?) 300W x 1

MRP-F300 - 4/3/2 Channel Power Amplifier

Overview

Best Dollar-Per-Watt performance

The Perfect Upgrade Choice

Sleek Aggressive Design

Power up your system with Alpine’s V-Power amplifiers! This best selling family of amplifiers offers more choices for building the right system for you, and provides flexibility and value in an aggressive design. Alpine continues to bring you mind-blowing sound performance – only the best - so you get the sound you deserve.

High Performance, High Value

Want serious power for your system? While trying not to blow your budget? Go with one of the Alpine V-Power amps for unbeatable dollar-per-watt value and Alpine quality sound, along with Bass EQ for maximizing bass performance.

Clean, Efficient Power

Alpine’s high-power mono amp Class-D design gives you more power, cleaner signal and tighter, deeper bass without draining your battery. Class-D provides continuous clean power to your speakers, operating at 80% efficiency far greater than conventional Class-A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.

Exceptionally Easy Upgrade

The V-Power’s speaker level inputs connect directly to any head unit, without the need for external converters. This makes the V-Power series ideal for upgrading factory audio equipment. High-level speaker inputs and flush mount controls make for easy installation. The units come with end caps that cover and protect your wiring connections while creating a clean, finished appearance. Step up your factory system to Alpine sound.

Cooler Amps = No Shut Down

Rugged heat sinks and an extremely sophisticated thermal managament processor that continuously monitors the amp’s temperature, ensure nonstop output and stable, reliable performance.

FEATURES

General

  • Gain Control: Continuously Adjustable Gain Control
  • Board Design: Dual Sided Glass Epoxy PC Board
  • Final Outputs: Non-Fading Pre-Amp Output
  • Pre-Amp Stage: Discrete
  • Connector Plating: Gold Plated Input, Output, Power and Speaker Terminals
  • Crossover: Adjustable Low-Pass/High-Pass
  • Speaker-Level Inputs: Speaker Level Inputs
  • RCA Output: Gold Plated RCA Input Connectors
  • Power Indicator: Top Mounted Blue LED Power Indicator
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Board Circuitry: STAR Circuitry
  • Power Supply Design: MOSFET Power
  • Power Supply: DC-DC PWM Power Supply
  • Thermal Control: Thermal Management Control
  • Channel Design: 4/3/2 Channel
  • Amplifier Type: Class-A/B

Install

  • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
  • Terminal Layout: Two-Sided

SPECIFICATIONS

General

  • Signal to Noise: 100dBA
  • Speaker Impedance: 4 or 2 ?
  • Frequency Response: 20 -20kHz (0, -1dB)
  • Input Sensitivity: 0.2 - 4.0V
  • Power Requirements: 14.4V DC (11V to 16V)

Dimensions

  • Heat Sink (WxHxD) in: 8-17/64'' x 2-23/64'' x 9-33/64''
  • Heat Sink (WxHxD) mm: 210mm x 60mm x 242mm
  • Foot Print (WxHxD) in: 10-15/16'' x 2-23/64'' x 9-27/32''
  • Foot Print (WxHxD) mm: 270mm x 60mm x 242mm

Sound Tuning

  • Subsonic Filter: 15Hz (Fixed), -18dB/oct.
  • EQ (Equalizer): Bass EQ (Fixed Frequency): 50Hz +12dB
  • Crossover: 50Hz-400Hz, -12dB/oct. (Low-Pass/High-Pass)

RMS Power Ratings

  • Bridged 4 Ohms: (@ 14.4V ?1%THD+N, 20Hz - 20kHz) 150W x 2
  • Per channel into 2 Ohms: (@ 14.4V ?1%THD+N, 20Hz - 20kHz) 75W x 4
  • Per channel into 4 Ohms: (@ 14.4V ?1%THD+N, 20Hz - 20kHz) 50W x 4

CEA-2006 Power Ratings

  • CEA-2006 Power Rating: (4 ? @14.4V ?1% THD+N, S/N: 80dBA, ref:1W into 4 ?) 50W x 4